Hi, I also loaded mondo via Synaptec. It hangs after a few seconds: brianp@trex:~$ sudo mondoarchive Initializing... See /var/log/mondoarchive.log for details of backup run. Checking sanity of your Linux distribution WARNING: Module loop not found. I think you have a Windows 9x partition. << hang forever >>
The last error it complains about in the /var/log/mondoarchive.log file is this: Mindi v2.0.4-r2045 modinfo: could not find module libata But then it ends with "...ran just fine. :-)"
I looked for libata in Synaptec, but it is not found.
Here's the log file below.
Thank you,
BrianP
============================================ Time started: Sat Apr 18 14:11:48 2009
running: dmesg -n1 > /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.tmp 2> /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Mondo Archive v2.2.7-r2045 --- http://www.mondorescue.org running x86_64 binaries running on x86_64 architecture ----------------------------------------------------------- NB: Mondo logs almost everything, so don't panic if you see some error messages. Please read them carefully before you decide to break out in a cold sweat. Despite (or perhaps because of) the wealth of messages. some users are inclined to stop reading this log. If Mondo stopped for some reason, chances are it's detailed here. More than likely there's a message at the very end of this log that will tell you what is wrong. Please read it! -Devteam ----------------------------------------------------------- Zero... [Main] mondoarchive.c->welcome_to_mondoarchive#116: One... [Main] mondoarchive.c->welcome_to_mondoarchive#117: Two... [Main] mondoarchive.c->welcome_to_mondoarchive#118: Three... [Main] mondoarchive.c->welcome_to_mondoarchive#119: Four... [Main] mondoarchive.c->distro_specific_kludges_at_start_of_mondoarchive#136: Unmounting old ramdisks if necessary running: mount | grep cdrom | grep super > /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.tmp 2> /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 running: mount | grep floppy | grep super > /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.tmp 2> /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran with res=256 [Main] libmondo-tools.c->mount_boot_if_necessary#1252: Started sub [Main] libmondo-tools.c->mount_boot_if_necessary#1253: About to set g_boot_mountpt[0] to '\0' [Main] libmondo-tools.c->mount_boot_if_necessary#1255: Done. Great. Seeting command to something [Main] libmondo-tools.c->mount_boot_if_necessary#1258: Cool. Command = 'grep -v ":" /etc/fstab | grep -vE '^#.*$' | grep -E "[ ]/boot[ ]" | tr -s ' ' ' ' | cut -f1 | head -n1' [Main] libmondo-tools.c->mount_boot_if_necessary#1260: tmp = '' [Main] libmondo-tools.c->mount_boot_if_necessary#1298: Ended sub [Main] libmondo-tools.c->get_kernel_version#262: g_kernel_version = 2.628000 running: rm -Rf /var/cache/mondo/changed.files* > /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.tmp 2> /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.err --------------------------------start of output----------------------------- --------------------------------end of output------------------------------ ...ran just fine. :-) Checking sanity of your Linux distribution running: grep ramdisk /proc/devices > /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.tmp 2> /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.err --------------------------------start of output----------------------------- 1 ramdisk --------------------------------end of output------------------------------ ...ran just fine. :-) running: mount | grep -Ew 'vfat|fat|dos' | grep -vE "/dev/fd|nexdisk" > /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.tmp 2> /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.err --------------------------------start of output----------------------------- /dev/sde1 on /media/2GB_THUMB type vfat (rw,nosuid,nodev,uhelper=hal,shortname=mixed,uid=1000,utf8,umask=077,flush) --------------------------------end of output------------------------------ ...ran just fine. :-) I think you have a Windows 9x partition. [Main] libmondo-files.c->find_home_of_exe#434: find_home_of_exe () --- Found cmp at /usr/bin/cmp running: mindi -V > /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.tmp 2> /r5/mondo.tmp.9qs06z/mondo-run-prog-thing.err --------------------------------start of output----------------------------- Mindi v2.0.4-r2045 modinfo: could not find module libata --------------------------------end of output------------------------------ ...ran just fine. :-)