I'm Having Trouble Logging On to Linux...

Hello,

I've been using linux for almost a year now, but this is my first experience with the ubuntu forums, however i have heard that it is a very helpful place.

Here is my problem: my linux computer was working just fine. I restarted it for one reason or another(i don't even remember why) and when it booted back and i tried to log in i got this message:

"GDM could not write to your authorization file. This could mean that you are out of disk space or that your home directory could not be opened for writing. In any case, it is not possible to log in. Please contact your system administrator."

To be honest i have no idea what to do. Can someone help me PLEASE? i'm starting to go into linux withdrawl because i've had to use our windows computer for a week now.

Any help or suggestions would be greatly appretiated

Is your /home folder, in fact, full?

I didn't think so. How would I check that?

Is your /home a seperate partition? If so "df"

Is your /home a seperate partition? If so "df"

I'm sorry, but I don't know what that means...while I've been using Linux for almost a year now, I'm still pretty new to all the technical stuff, and to me, what you just said is technical...

Type df into a console and paste the contents here

(Can u log in at all? As root even?)

PS: You can hit ctrl-alt-f1 (or f2 or up to f6) to go to a virtual terminal, and try logging in there (command line)

Again I'm sorry for my linux illiteracy, but...

1. i don't really know what it means/how i would "type df into a console"

and 2. i don't think i can log in at all...its just at the ubuntu log in sceen where it asks for my user name and password. i put them in and it gives me the message in my first post. the only option is to click okay, and when i do it just takes me back to the log in screen

PS: You can hit ctrl-alt-f1 (or f2 or up to f6) to go to a virtual terminal, and try logging in there (command line)

also, becuase i've used nothing but windows my whole life up until now i don't really know how to use the command line a ton...such as loggin in in the command line

Presumably, you don't have a graphical environment working right now, right? That means you have something that looks like a command-line prompt. Type ``` df -h

also, becuase i've used nothing but windows my whole life up until now i don't really know how to use the command line a ton...such as loggin in in the command line Press Control-Alt-F1. What happens?

Presumably, you don't have a graphical environment working right now, right? That means you have something that looks like a command-line prompt. Type ``` df -h

well i had a graphical environment, then i pushed *ctrl+alt+f1* and it took me to some kind of command line, the last line reading "andrew login:"

i typed df -h

it then said "password"

i typed in my password

it responed "login incorrect"

At login: you should log in. Type your username.

Then you'll be asked for your password at password:

Only after you've logged in should you type ``` df -h

The computer assumed your username was df -h. That's why it asked for your password.

This is what I get, so you get an idea of what it looks like ```
~$ df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/hda6              20G  2.2G   17G  12% /
tmpfs                 221M     0  221M   0% /dev/shm
tmpfs                 221M   13M  209M   6% /lib/modules/2.6.12-10-386/volatile
**/dev/hda5              97G   45G   48G  49% /home**
/dev/hda1              15G  6.0G  8.7G  41% /windows

At login: you should log in. Type your username.

Then you'll be asked for your password at password:

Only after you've logged in should you type ``` df -h

The computer assumed your username was df -h. That's why it asked for your password.

This is what I get, so you get an idea of what it looks like ```
~$ df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/hda6              20G  2.2G   17G  12% /
tmpfs                 221M     0  221M   0% /dev/shm
tmpfs                 221M   13M  209M   6% /lib/modules/2.6.12-10-386/volatile
**/dev/hda5              97G   45G   48G  49% /home**
/dev/hda1              15G  6.0G  8.7G  41% /windows

alright so i got that...but i don't have anything that says /home...under the "mounted on" part i have these four:

/ /dev/shm /.dev /dev

Hm. No separate /home partition. Okay. You have a few options. The first I know how to do. The others are possible in theory, but I don't know how to do them.

1. Get a live CD like Ubuntu's live CD or, better yet, Knoppix. This can mount your current installation, and you can browse around to see how full a folder is (your /home folder in this case).

1. Somehow, via the command-line, enable the root user, and allow it to log in graphically. Then, once logged in, poke around and see how big the /home folder is and how full it is.

Of course, if you don't have a separate /home partition, then it can't be that your /home folder is full... it must be that your entire hard drive is full... or that, as the original warning stated, GDM can't write to your authorization file. I'm wondering if that's the .ICEauthority people kept talking about last week.

Sorry I can't be more help.

Hm. No separate /home partition. Okay. You have a few options. The first I know how to do. The others are possible in theory, but I don't know how to do them.

1. Get a live CD like Ubuntu's live CD or, better yet, Knoppix. This can mount your current installation, and you can browse around to see how full a folder is (your /home folder in this case).

1. Somehow, via the command-line, enable the root user, and allow it to log in graphically. Then, once logged in, poke around and see how big the /home folder is and how full it is.

Of course, if you don't have a separate /home partition, then it can't be that your /home folder is full... it must be that your entire hard drive is full... or that, as the original warning stated, GDM can't write to your authorization file. I'm wondering if that's the .ICEauthority people kept talking about last week.

Sorry I can't be more help.

okay so i have a live cd, so i just put that in and restart my computer, then when it comes up just delete stuff off my hard drive to open it up some?

okay so i have a live cd, so i just put that in and restart my computer, then when it comes up just delete stuff off my hard drive to open it up some? Is it a live Ubuntu or Knoppix?

Is it a live Ubuntu or Knoppix?

live ubuntu

Okay. It'll take a few more steps, then.

1. Boot it up.

In Breezy, this is Applications > Accessories > Terminal. In Hoary, it's Applications > System Tools > Terminal.

1. When you get to the live session, open a terminal.

sudo fdisk -l

1. Once you're in the terminal type ```

well shoot...i just realized that i've lost my live disk...is there anything i can do without it or not really?

is there anything i can do without it or not really? Yes, but I don't know how (see above about letting root log in).

alright

well like i said in my first post this is my first time using ubuntu forums, so i'm not really sure what to do at this point...if i do find my live cd would i then just try and conctact you again, or open up a new thread or what?

and by the way, thank you for your help

if i do find my live cd would i then just try and conctact you again, or open up a new thread or what? Just post in this thread and say "I found it!" It's better to keep it to one thread because if, for some reason, I'm not around, someone else can help out and see what the context of the problem is and what you've tried already.

To find the thread again, click on Search (at the top-right) and select "Find All Your Threads."

In the meantime, I'll poke around and see if there's an easy way to enable graphical root login from the terminal.

here's my situation the bootloader loads but after sometime the computer floppy disk lit on and i see my hardisk light is on as well but on the screen it's totally black no ubuntu graphical greeter and no terminal either to log-in.

what to do? thank you in advance and hope to hear from you. GODspeed!

well shoot...i just realized that i've lost my live disk...is there anything i can do without it or not really? Yes, you can solve your problem.

You are getting the same gnome error as I described in this thread. The solution is probably the same.

PROBLEM: ~/.ICEauthority cannot be read during GNOME startup.

SOLUTION:

1) Hit CTRL + ALT + F1 to get to a text console. You will be prompted for your username and password.

2) Change the owner of ~/.ICEauthority back to your username. To do this, type

sudo chown USERNAME .ICEauthority

where USERNAME is replaced by your username. You will be prompted for your password.

3) Hit CTRL + ALT + F7 to get back to the GDM graphical login screen. Enter your username and password as prompted to log into GNOME. Problem (hopefully) solved.

alright so i pushed *ctrl + alt + F1*, then entered my user name and password. it brought up the prompt or whatever you want to call it like i was in the terminal : USERNAME@USERNAME~:

at this point i typed in the "sudo chown USERNAME .ICEauthority" and pushed enter

the first time i did it it asked for my password, i put it in and pressed enter, then pushed *ctrl + alt + F7*

it took me back to the log in screen, i tried logging in and go the same message as i did originally(i my first post)

i tried one more time, the same thing happened except this time after i typed the "sudo chown USERNAME .ICEauthority" it didn't ask me for my password. instead it just brought up a new line with the "USERNAME@USERNAME~:" prompt. i pushed *ctrl + alt + F7* again to exit, tried logging on and again got the same message

Is it really saying "USERNAME@USERNAME~:" at the prompt? Because if it is...I don't think thats good...

-Wild

Is it really saying "USERNAME@USERNAME~:" at the prompt? Because if it is...I don't think thats good...

-Wild

no...replace USERNAME with my username, for example "bob@bob~:"

I found my Ubuntu Live CD! What do I do now?

I found my Ubuntu Live CD! What do I do now? Boot from it. Then open a terminal and type ``` sudo fdisk -l df -h cat /etc/fstab

this is what i got:

warty@ubuntu:~ $ sudo fdisk -l

Disk /dev/hda: 13.6 GB, 13676544000 bytes 16 heads, 63 sectors/track, 26500 cylinders Units = cylinders of 1008 * 512 = 516096 bytes

Device Boot Start End Blocks Id System /dev/hda1 * 1 25507 12855496+ 83 Linux /dev/hda2 25508 26500 500472 f W95 Ext'd (LBA) /dev/hda5 25508 26500 500440+ 82 Linux swap

warty@ubuntu:~ $ df -h Filesystem Size Used Avail Use% Mounted on

warty@ubuntu:~ $ cat /etc/fstab

UNCONFIGURED FSTAB FOR BASE SYSTEM

Added by Morphix

/dev/hda1 /mnt/hda1 ext3 noauto,users,exec 0 0

Added by Morphix

/dev/hda5 /mnt/hda5 auto noauto,users,exec 0 0

Added by Morphix

/dev/cloop0 /mnt/cloop0 auto noauto,users,exec 0 0 /dev/sda1 /mnt/sda1 auto noauto,users,exec,umask=000,uid=warty 0 0 /cdrom1 /cdrom1 supermount auto,user,fs=auto,dev=/dev/cdrom1

Try this: ``` sudo mkdir /recovery sudo mount -t ext3 /dev/hda1 /recovery gksudo nautilus

/recovery/home/kregel

I'm assuming your username is kregel. Go to whatever your real home folder is. 

Press Control-H (to see hidden directories).

Right-click on the file called .ICEauthority and select **Properties**.
Do you own it? What are the permissions on that file?

under the permissions tab it says that the owner is warty

under the permissions tab it says that the owner is warty Is Warty your username?

It should be Owner: kregel Group: kregel Owner: read (check), write (check) everything else not checked.

no, "andrew" is

It should be Owner: kregel Group: kregel Owner: read (check), write (check) everything else not checked.

i didn't see that part before. let me switch it real quick

Sorry, then owner should be andrew and group andrew.

it won't let me change it to andrew...there's just a drop down menu with different things to choose from, such as "root"..stuff like that, but no andrew..and it won't just let me type it in

it won't let me change it to andrew...there's just a drop down menu with different things to choose from, such as "root"..stuff like that, but no andrew..and it won't just let me type it in Hm. This may not be the cleanest workaround, but maybe you can try checking all the boxes (i.e., giving every user full access to the file).

Presumably that will then allow you to log in without the live CD now that anyone has read/write access to the /home/andrew/.ICEauthority file. Once you're logged in you can uncheck the appropriate boxes (leaving only owner read and owner write checked).

Hopefully that'll work.

Initially, I thought your /home partition might be full, but you don't have a /home partition. So the .ICEauthority file is the only thing I can think of.

i checked all the boxes, restarted my computer, this time taking out the live cd, tried logging in and it gave me the same message that i put in my first post

Damn.

So you're at the command-line, right?

Can you try typing this? ``` sudo chown andrew:andrew /home/andrew/.ICEauthority startx

first press ctrl + alt + F1 from the login screen?

first press ctrl + alt + F1 from the login screen? Yes. Control-Alt-F1, then what was in my previous post. Sorry.

Edit: If that doesn't help, this might.

alright this is what happened when i typed it in:

"/usr/bin/X11/startx: line 132: cannot create temp file for here document: No space left of device /usr/bin/X11/startx: line 132: cannot create temp file for here document: No space left of device

fatal server error: Server is already active for display if this server is no longer running, remove /tmp/.X0-lock and start again

Please contact the The X.Org Foundation support at http://wiki.X.Org for help

Xlib: Connection to "0.0" refused by server

Xlib: No protocol specified

giving up xinit: unable to connect to X serve xinit: No such process (errno 3): server error. andrew@andrew:~$"

andrew@andrew:~$" Can you type ``` df -h

it looks like this:

Filesystem Size Used Avail Use% Mounted on /dev/hda1 13G 12G 0 100% / tempfs 126M 0 126M 0% /dev/shm /dev 13G 12G 0 100% /.dev none 5.0M 2.8M 2.3M 36% /dev

it looks like this:

Filesystem   Size   Used   **Avail**   Use%   Mounted on
/dev/hda1    13G    12G    **0**        100%        /
tempfs         126M   0      126M    0%        /dev/shm
/dev            13G     12G    0       100%     /.dev
none             5.0M   2.8M  2.3M    36%      /dev

Well, that's the problem, then. Available for /dev/hda1 is 0. You have no space left on your hard drive. You have to delete some files.

alright so i've used windows up until a short while ago but since switching to linux have really liked it, however i still know how to do pretty much nothing with it besides check my email and play games(which i can do with windows). i would love to learn as much as i can about all the stuff you can do with linux though, so could you explain to me how to do that?

Well, there's the easy way, and then there's the point-and-click way.

The easy way is to use the command-line to delete files. Let's say, for example, that you have a bunch of mp3s in /home/andrew/music that you want to get rid of. You type this in: ``` cd /home/andrew/music ls rm *.mp3

If you wanted to delete an entire folder, say your pictures folder, you would do ```
rm -R /home/andrew/pictures

The point-and-click way, you'll need the live CD again for. Follow the instructions I gave you before, except forget about the right-clicking on .ICEauthority--just delete the files you don't want any more.

Ctrl + Alt + F1 login with your username and password

cd /home/USERNAME (replacing username with yours)

list the contents

ls -l

it should list something like:

drwxr-xr-x   4 sami sami   4096 2005-11-27 06:17 downloads
drwxr-xr-x   5 root sami   4096 2005-12-05 00:13 encryptions
-rwxrwxrw-   1 root root    517 2005-11-28 14:38 initGroups.sh
-rw-r--r--   1 sami sami  20480 2005-12-08 07:04 logs.txt
-rw-r--r--   1 sami sami     24 2005-12-05 00:26 passwd.txt
drwxr-xr-x   6 sami sami   4096 2005-12-07 22:33 pptpd-1.2.3
-rwxr--r--   1 root sami 185721 2005-12-07 22:28 pptpd-1.2.3.tar.gz
-rwxr--r--   1 sami sami 829440 2005-12-07 22:20 pptpd-1.3.0.tar
drwxrwxr-x  13 sami sami   4096 2005-11-29 17:02 profile
-rwxr-----   1 sami sami   7722 2005-11-27 04:26 smb.conf
drwxr-xr-x   2 root root   4096 2005-11-29 05:02 test
-rwxrwxrwx   1 sami sami     38 2005-11-28 15:24 test.sh
-rw-r--r--   1 sami sami   2155 2005-12-05 09:58 trace.txt
drwxr-xr-x   2 sami sami   4096 2003-09-28 17:46 udp-broadcast-relay-0.3
-rwxr--r--   1 sami sami  71680 2005-12-07 21:28 udp-broadcast-relay-0.3.tar

find files you wish to delete to make some room, for an instance some downloaded files. Lets say you have a directory called downloads under your home folder.

cd downloads

now list its contents

ls -l

drwxr-xr-x  2 sami sami 4096 2005-11-27 06:17 samba
drwxr-xr-x  3 sami sami 4096 2005-11-27 06:20 webmin
drwxr-xr-x  4 sami sami 8096 2005-11-27 06:50 testfile

Lets say i want to delete a single file, in this case the testfile

rm testfile

Now lets say i see a useless folder that i just extracted some install files

rm -r samba

This would remove the whole directory

*edit* Uups, was a bit too slow on the typing :)

i have a folder with music in it called "Andrew's Music"

i don't want to delete the whole folder, just some of the songs/folders in it

whenever i try cd /home/andrew/Andrew's Music

the next line that comes up looks like this : >

and then it won't let me do anything

Can you try ``` cd /home/andrew ls

How does Andrew's Music appear?

its a blueish-purpleish color

its a blueish-purpleish color Sorry. I wasn't specific enough. What's the name of the folder? Does it appear as ``` Andrew's Music

that is correct, it appears as "Andrew's Music" in a purplish-blueish font color

i have a folder with music in it called "Andrew's Music"

i don't want to delete the whole folder, just some of the songs/folders in it

whenever i try cd /home/andrew/Andrew's Music

the next line that comes up looks like this : >

and then it won't let me do anything

do:

cd "/home/andrew/Andrew's Music"

okay, so after i've deleted some stuff what do i do? exit the comand line and try logging back in from the graphical login screen?

okay, so after i've deleted some stuff what do i do? exit the comand line and try logging back in from the graphical login screen?

startx should do the trick allso.

YAY!! It let me log on! So would the next step now to make sure this doesn't happen again be to get a bigger hard drive, or what?

YAY!! It let me log on! So would the next step now to make sure this doesn't happen again be to get a bigger hard drive, or what?

Well, bigger hard drive would do the trick. But if you arent in dire need of the additional space i'd suggest you just keep an eye out for the space left on your current hard drive and do cleanups on it on regular basis (as in delete un-needed files)

YAY!! It let me log on! So would the next step now to make sure this doesn't happen again be to get a bigger hard drive, or what? Yes.

Thank you all for all of your help

i forgot to drop by and say thank you. GODspeed!

wow excellent effort and persistence by helpee's and helper's