I can't get any audio out of Rosegarden.
TiMiditty can open and play mid files just fine. Jack is up and running. kinfocenter says that Synth devices : NOT ENABLED IN CONFIG and Midi devices : NOT ENABLED IN CONFIG Kernel is 2.6.27.7-generic Hydrogen plays audio fine.
Starting rosegarden from the cmd line i get: kbuildsycoca running... Enhanced3DNow! detected SSE2 detected PluginFactory::instance(dssi): creating new DSSIPluginFactory LADSPAPluginFactory::discoverPlugins - discovering plugins; path is [/home/matt/.dssi] [/usr/local/lib/dssi] [/usr/lib/dssi] matt@Mega-Linux:~/Desktop$ LADSPAPluginFactory::discoverPlugins - done PluginFactory::instance(ladspa): creating new LADSPAPluginFactory LADSPAPluginFactory::discoverPlugins - discovering plugins; path is [/home/matt/.ladspa] [/usr/local/lib/ladspa] [/usr/lib/ladspa] Rosegarden 1.7.0 - AlsaDriver [ALSA library version 1.0.17a, module version 1.0.17, kernel version 2.6.27-7-generic] Enhanced3DNow! detected SSE2 detected
JackDriver::initialiseAudio - JACK sample rate = 44100Hz, buffer size = 1024 JackDriver::initialiseAudio - creating disk thread JackDriver::initialiseAudio - found 6 JACK physical outputs JackDriver::initialiseAudio - connecting from "rosegarden:master out L" to "system:playback_1" JackDriver::initialiseAudio - connecting from "rosegarden:master out R" to "system:playback_2" JackDriver::initialiseAudio - found 2 JACK physical inputs JackDriver::initialiseAudio - connecting from "system:capture_1" to "rosegarden:record in 1 L" JackDriver::initialiseAudio - connecting from "system:capture_2" to "rosegarden:record in 1 R" JackDriver::initialiseAudio - initialised JACK audio subsystem
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype 655362, cap 99] 128,0 - (TiMidity, TiMidity port 0) (WRITE ONLY) [ctype 1, ptype 2, cap 66] 128,1 - (TiMidity, TiMidity port 1) (WRITE ONLY) [ctype 1, ptype 2, cap 66] 128,2 - (TiMidity, TiMidity port 2) (WRITE ONLY) [ctype 1, ptype 2, cap 66] 128,3 - (TiMidity, TiMidity port 3) (WRITE ONLY) [ctype 1, ptype 2, cap 66]
CREATED OUTPUT PORT 3:out 1 - MIDI software device for device 0 Connecting my port 3 to 128:0 on initialisation done Creating device 0 in Play mode for connection 128:0 TiMidity port 0 (write) Default device name for this device is MIDI software device CREATED OUTPUT PORT 4:out 2 - MIDI software device 2 for device 1 Connecting my port 4 to 128:1 on initialisation done Creating device 1 in Play mode for connection 128:1 TiMidity port 1 (write) Default device name for this device is MIDI software device 2 CREATED OUTPUT PORT 5:out 3 - MIDI software device 3 for device 2 Connecting my port 5 to 128:2 on initialisation done Creating device 2 in Play mode for connection 128:2 TiMidity port 2 (write) Default device name for this device is MIDI software device 3 CREATED OUTPUT PORT 6:out 4 - MIDI software device 4 for device 3 Connecting my port 6 to 128:3 on initialisation done Creating device 3 in Play mode for connection 128:3 TiMidity port 3 (write) Default device name for this device is MIDI software device 4 CREATED OUTPUT PORT 7:out 5 - MIDI output system device for device 4 done Creating device 4 in Play mode for connection 14:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI output system device Creating device 5 in Record mode for connection 14:0 Midi Through Port-0 (duplex) (not connecting) Default device name for this device is MIDI input system device AlsaDriver::setCurrentTimer((auto)) extractVersion: major = 1, minor = 0, subminor = 17, suffix = "" AlsaDriver::versionIsAtLeast: is version 1.0.17 at least 1.0.14? yes extractVersion: major = 2, minor = 6, subminor = 27, suffix = "generic" AlsaDriver::versionIsAtLeast: is version 2.6.27-7-generic at least 2.6.20? yes Using low-resolution system timer, sending a warning Current timer set to "system timer" with timer checks WARNING: using system timer with only 250Hz resolution! AlsaDriver::initialiseMidi - initialised MIDI subsystem
Composition::getTrackById(0) - WARNING - track id not found, this is probably a BUG /build/buildd/rosegarden-1.7.0/src/base/Composition.cpp:1539 Available track ids are: Renaming device 0 to General MIDI Device Renamed 130:3 to General MIDI Device LADSPAPluginFactory::discoverPlugins - done CompositionModelImpl::slotInstrumentParametersChanged() TrackButtons::slotUpdateTracks Rosegarden: WARNING: No accurate sequencer timer available RosegardenGUIApp::awaitDialogClearance: entering RosegardenGUIApp::awaitDialogClearance: exiting Launched ok, pid = 10713 Comparing current version "1.7.0" with latest version "1.7.2" RosegardenGUIApp::awaitDialogClearance: entering
ALSA Client information:
14,0 - (Midi Through, Midi Through Port-0) (DUPLEX) [ctype 2, ptype 655362, cap 99] 128,0 - (TiMidity, TiMidity port 0) (WRITE ONLY) [ctype 1, ptype 2, cap 66] 128,1 - (TiMidity, TiMidity port 1) (WRITE ONLY) [ctype 1, ptype 2, cap 66] 128,2 - (TiMidity, TiMidity port 2) (WRITE ONLY) [ctype 1, ptype 2, cap 66] 128,3 - (TiMidity, TiMidity port 3) (WRITE ONLY) [ctype 1, ptype 2, cap 66]
RosegardenGUIApp::awaitDialogClearance: exiting
When I try to play something, I see this and get no sound:
SoundDriver::initialiseAudioQueue -- new queue has 0 files AudioPlayQueue::~AudioPlayQueue() JackDriver::stopTransport: resetting m_haveAsyncAudioEvent SoundDriver::clearAudioQueue