Ok, after three days of trouble, I finally got x.org 6.9 running onto Kubuntu Breezy. :) In short: Yes you could get x.org 6.9 running, but it is not easy so I suggest you should try it only when you have serious problems with the x.org release you are currently using AND have already some experience with Linux. I would describe the risk of upgrading as follow: Loss of data: low (but not zero!) That you throw your PC from the table: medium That you become crazy: high That you don't get x.org 6.9 running: very high That you end up with a PC which does not has a running x-server anylonger: very high So everyone who do not need 6.9 immediately should wait until Dapper is out :)
For those who still want to upgrade, will follow the HOWTO now.
1: Firs we need the sourcecode of x.org 6.9 go to http://wiki.x.org/wiki/Mirrors select a mirror near you and download you will need the file X11R6.9.0-src.tar.bz2 which is located on the ftp server at pub/X11R6.9.0/src-single/ . After downloading uncompress the file into a folder wit a few hundred free MB.
2: We will need some tools for building x.org 6.9, so apt-get install bison flex libpam0g-dev it might be possible that I have forgotten some, so refer to the file BUILD in the source directory if you need to apt-get some more programs.
3: Working around a bug in Breezy There is a bug in Breezy, which would us prevent from compiling: http://bugzilla.ubuntu.com/show_bug.cgi?id=18157 http://ubuntuforums.org/showthread.php?t=80678 The bug is fixed in the Dapper packages, so we need them. Add to your /etc/apt/sources.list deb http://de.archive.ubuntu.com/ubuntu dapper main restricted save and do apt-get update , and then apt-get install libc6 libc6-dev . This will install libc6 libc6-dev libc6-i686 from Dapper. After that comment deb http://de.archive.ubuntu.com/ubuntu dapper main restricted out and do apt-get update again to prevent future not planned upgrade accidents.
4: make lmdir I don't know wether this is necessary or not, but I followed the introduction in the file BUILD . Go into the directory xc/config/util and do make -f Makefile.ini lndir then copy (as root) lndir to /usr/local/bin After that create a new folder (as normal user again) at the same level as xc , go into it and do lndir ../xc or similar. This will create some directories and links.
5: compiling So now we will know if all above worked. In one xterm do make World > World.log 2>&1 which will direct all messages to World.log. If all goes well the logfile will be 5MB big an hour later. You can watch the messages with tail -f World.log in a second xterm. At the end my logfile contains a lot of warnings and some error messages. The error messages complains about a missing fcfreetype.h but it looks like this file is not really necessary. No other error are written in the logfile.
6: Now the risky part starts and I suggest you to read the full HOWTO until the end before proceed with this point!!!! Login as root without a running x-server. Then remove your existing x.org installation. apt-get -s remove xserver-xorg xorg-common . This will show you that (at least on my machine) 63 packages will be removed. Do it apt-get remove xserver-xorg xorg-common .
7: Installing the new x.org 6.9 Go into the directory where you did make World > World.log 2>&1 before. Now take a breath (_from this point there will be no way back_) and enter make install (as far as I know there is no uninstall available). Then he will start copying a lot of files. On my machine he aborts the process, complaining that /usr/X11R6/lib/X11/xkb/symbols/pc is not a directory where he can copy files in. Yes, pc is a file and not a directory, so I simply renamed pc to pc.file and generated a directory pc. mv pc pc.file ; mkdir pc Now just rerun make install , at least for me it ran successfully until the end.
8: Starting x.org 6.9 Entering startx might shock you because it did not work (at least for me). It complains that there is no /usr/bin/X11/X . But when did a reboot kdm started automatically as always. :D Just startx still did not work. I tried to make a link from /usr/bin/X11/X to /usr/X11R6/bin/Xorg but I made a mistake and linked /usr/X11R6/bin/X to /usr/X11R6/bin/Xorg and now nothing worked. But for some reason suddenly there was a executable /usr/bin/X11/X which I simply copied back to /usr/X11R6/bin/X. startx now got much further but aborted with some missing xterm . Fortunately startx icewm did work (you have to apt-get install icewm), so nothing completely lost. I figured out that startx did not start kde anylonger but tries twm by default and that /etc/X11/xinit/xinitrc was wrong configured. I corrected the path to xterm in the file and now startx starts twm but not kde - I can life with that at the moment.
9: What works: Finally i got x.org 6.9 working and with the new release I am able to play videos without crashing the x-server and there is some _ 2D _ acceleration support for my * ATI Radeon Xpress 200M * now (I had to use noaccel as option before). The disadvantage is that startx does not start kde (but the login manager does). I am sure this could be corrected if I would know where to look ;)
So do this on _ your own risk _ and only when you need it and have already some experience with Linux.
Having fun with 2D acceleration now :D