Hi,
This is my first post in the forum. I had problems configuring Evolution to use hotmail but finally got it working. Several threads in different sites pointed to solutions that didn't work for my current configuration:
- Ubuntu Intrepid Ibex (8.10)
- Evolution 2.24
- xinetd (eXtended InterNET Daemon) instead of inetd
Here are the steps I followed:
1- [COLOR="Blue"]Using Synaptic install hotway and hotsmtp (you can find both of them by typing hotmail in the Quick Search Box)[/COLOR].
2- [COLOR="Blue"]Open a terminal and type:[/COLOR]
*sudo gedit /etc/xinetd.d/hotwayd*
[COLOR="Blue"]in the new window that opens type (or copy & paste) this:[/COLOR]
[B][I] service hotwayd { disable = no type = unlisted socket_type = stream protocol = tcp wait = no user = nobody groups = yes server = /usr/bin/hotwayd server_args = -r port = 110 }[/I][/B]
[COLOR="Blue"]save the file and close gedit[/COLOR]
3- [COLOR="Blue"]You should be back to the terminal you opened in step 2. Now type:[/COLOR]
*sudo gedit /etc/xinetd.d/hotsmtpd*
[COLOR="Blue"]in the new window that opens copy this:[/COLOR]
[B][I]service hotsmtpd { disable = no type = unlisted socket_type = stream protocol = tcp wait = no user = nobody groups = yes server = /usr/bin/hotsmtpd #server_args = -r port = 25 }[/I][/B]
[COLOR="Blue"]save the file and close gedit[/COLOR].
4 - [COLOR="Blue"]You're back at the same Terminal window. Type:[/COLOR]
*sudo gedit /etc/hosts*
[COLOR="Blue"]this command will open a file which content should be similar to this one:[/COLOR]
[I]127.0.0.1 localhost 127.0.1.1 Lobo
The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts[/I]
[COLOR="Blue"]in this file you need to add the following two lines:[/COLOR]
[B][I]hotwayd: 127.0.0.1 hotsmtpd: 127.0.0.1[/I][/B] [COLOR="Blue"] So the new content of the hosts file will be:[/COLOR]
[I]127.0.0.1 localhost 127.0.1.1 Lobo hotwayd: 127.0.0.1 hotsmtpd: 127.0.0.1
The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts[/I]
[COLOR="Blue"]save the file and close gedit.[/COLOR]
5 - [COLOR="Blue"]You're back at the Terminal window. Now we need to restart xinetd, so type:[/COLOR]
*sudo /etc/init.d/xinetd restart*
[COLOR="Blue"]the output you'll get should be:[/COLOR]
[I] * Stopping internet superserver xinetd [ OK ] * Starting internet superserver xinetd [ OK ][/I]
6 - [COLOR="Blue"]We're going to try the previous configuration works by typing in the Terminal window:[/COLOR] [B][I] sudo telnet localhost 25[/I][/B]
[COLOR="Blue"]the output you'll get should be similar to:[/COLOR] [I] Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 Lobo SMTP hotsmtpd v0.8.4. ESMTP-HTTPMail Gateway based on hotwayd.[/I]
[COLOR="Blue"]now type:[/COLOR]
*quit*
[COLOR="Blue"]and hit the Enter key.[/COLOR]
[COLOR="Blue"]you'll get the following output:[/COLOR] [I] 221 Service closing transmission channel Connection closed by foreign host.[/I]
7 - [COLOR="Blue"]We are going to repeat step 6 for port 110, so type in the Terminal window:[/COLOR] [B][I] sudo telnet localhost 110[/I][/B]
[COLOR="Blue"]the output you'll get should be similar to:[/COLOR] [I]Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK POP3 hotwayd v0.8.4 -> The POP3-HTTPMail Gateway. Server on Lobo active.[/I]
[COLOR="Blue"]now type:[/COLOR]
*quit*
[COLOR="Blue"]and hit the Enter key.[/COLOR]
[COLOR="Blue"]you'll get the following output:[/COLOR] [I] +OK see you later! Connection closed by foreign host. [/I]
8 - [COLOR="Blue"]It's time to configure Evolution now. Open Evolution and go to Edit -> Preferences. In the Preferences window you will be looking at the Mail Accounts. Click on Add. You'll be in the Identity tab. Fill in the information in that tab.[/COLOR]
[COLOR="Blue"]Now go to Receiving Email. There you need put the following info:[/COLOR]
Server Type: *POP* Server: *127.0.0.1:110* Username: *(full hotmail address, _including @hotmail.com_)* Use Secure Connection: *No Encryption* Authentication Type: *Password* [COLOR="Blue"] [COLOR="Blue"]Check Remember Password if you want.[/COLOR]
Now go to Sending Email. There you need to put the following info:[/COLOR]
Server Type: SMTP Server: *127.0.0.1:25* [COLOR="Blue"]Check Server Requires authentication[/COLOR] Use Secure Connection: *No Encryption* Authentication Type: *Plain* Username: *(full hotmail address, _including @hotmail.com_)* [COLOR="Blue"]Check Remember Password if you want.[/COLOR] [COLOR="Blue"] Click OK[/COLOR]
We are done! You should be able to send and receive e-mail through Hotmail now! Enjoy!
:)