I searched for nearly 4 hours for this info, so I thought I would throw it in a howto for those of you that also needed it.
Basically, the problem with the Laserjet 1000, is that the firmware is really crappy. It requires a firmware flash constantly, and being a $200 laser printer, what do you expect? In windows, it has a circumvention for this specific printer, but in linux, we have to set it up manually. Don't worry, it's pretty simple.
For this How-To, you'll need the following nonstandard packages:
LPR | LPRNG
(Either one works, to my knowledge. I personally used LPR, but the commands are the same)
NOTE: This is only for a printer hooked directly to the computer, not over a network. (Only For Local printing)
- Get the working firmware from the nice people who made your print driver in the first place. Then extract your firmware, /foo2zjs/sihp1000.img from it to somewhere you can remember. This file will be loaded upon logging in to your profile.
http://foo2zjs.rkkda.com/foo2zjs.tar.gz
- Make sure that the printer is setup normally, (You can see it in the 'System -> Administration -> Printing' menu. Also, make sure that there are no jobs waiting to be printed. Unplug the printer, wait for a moment, and plug it back in.
- 'System -> Preferences -> Sessions' -- 'Startup Programs' tab. Click the Add button, and type this in the box:
lpr /directory/you/extracted/to/sihp1000.img
- Log out, and then back in. Try printing a test page. If it does not work, unplug the printer, shut down the computer, then plug the printer in, and start the computer back up. This fully wipes the queue, and reflashes the firmware upon logging in.