I still do not have automatic start of default (chosen by GRUB_DEFAULT=0 in /etc/default/grub) even though I have cleared everything I could think of (grubenv and similar...) and Grub is installed on /dev/sda as it is supposed to... Any ideas?
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu quantal (development
branch)
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 482,107,391 482,105,344 83 Linux
/dev/sda2 482,109,438 488,396,799 6,287,362 5 Extended
/dev/sda5 482,109,440 488,396,799 6,287,360 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 ... ext4
/dev/sda5 ... swap
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 / ext4 (rw,noatime,nodiratime,errors=remount-ro,data=ordered,nouser_xattr)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ...
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ...
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
# set timeout=-1
set timeout=2
else
set timeout=2
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="$1"
if [ "$1" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.4.0-999-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ...
linux /boot/vmlinuz-3.4.0-999-generic root=UUID=... ro nohz=off text ipv6.disable=1
initrd /boot/initrd.img-3.4.0-999-generic
}
menuentry 'Ubuntu, with Linux 3.4.0-999-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root
echo 'Loading Linux 3.4.0-999-generic ...'
linux /boot/vmlinuz-3.4.0-999-generic root=UUID=... ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.4.0-999-generic
}
menuentry 'Ubuntu, with Linux 3.4.0-1-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ...
linux /boot/vmlinuz-3.4.0-1-generic root=UUID=... ro nohz=off text ipv6.disable=1
initrd /boot/initrd.img-3.4.0-1-generic
}
menuentry 'Ubuntu, with Linux 3.4.0-1-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ...
echo 'Loading Linux 3.4.0-1-generic ...'
linux /boot/vmlinuz-3.4.0-1-generic root=UUID=... ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.4.0-1-generic
}
menuentry 'Ubuntu, with Linux 3.3.0-5.dmz.1-liquorix-amd64' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ...
linux /boot/vmlinuz-3.3.0-5.dmz.1-liquorix-amd64 root=UUID=... ro nohz=off text ipv6.disable=1
initrd /boot/initrd.img-3.3.0-5.dmz.1-liquorix-amd64
}
menuentry 'Ubuntu, with Linux 3.3.0-5.dmz.1-liquorix-amd64 (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ...
echo 'Loading Linux 3.3.0-5.dmz.1-liquorix-amd64 ...'
linux /boot/vmlinuz-3.3.0-5.dmz.1-liquorix-amd64 root=UUID=... ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.3.0-5.dmz.1-liquorix-amd64
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ...
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root ...
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=... / ext4 errors=remount-ro,data=ordered,noatime,nodiratime,nouser_xattr 0 1
# swap was on /dev/sda5 during installation
UUID=... none swap sw 0 0
# zika tmpfs tweak
#tmpfs /tmp tmpfs defaults,noatime 0 0
#tmpfs /var/run tmpfs defaults,noatime 0 0
#tmpfs /var/lock tmpfs defaults,noatime 0 0
#tmpfs /var/log tmpfs defaults,noatime 0 0
#tmpfs /var/run tmpfs defaults,noatime 0 0
#tmpfs /var/mail tmpfs defaults,noatime 0 0
#tmpfs /var/spool tmpfs defaults,noatime 0 0
#tmpfs /var/tmp tmpfs defaults,noatime 0 0
#tmpfs /var/cache tmpfs defaults,noatime 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 1
= boot/initrd.img-3.3.0-5.dmz.1-liquorix-amd64 1
= boot/initrd.img-3.4.0-1-generic 2
= boot/initrd.img-3.4.0-999-generic 1
= boot/vmlinuz-3.3.0-5.dmz.1-liquorix-amd64 1
= boot/vmlinuz-3.4.0-1-generic 2
= boot/vmlinuz-3.4.0-999-generic 2
= initrd.img 1
= initrd.img.old 1
= vmlinuz 2
= vmlinuz.old 1
========= Devices which don't seem to have a corresponding hard drive: =========
sdb sdc sdd sde
=============================== StdErr Messages: ===============================
xz: (stdin): Compressed data is corrupt
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
...
list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '`
[COLOR="Red"]#[/COLOR] if [ "$list" ] && ! $in_submenu; then
[COLOR="Red"]#[/COLOR] echo "submenu \"Previous Linux versions\" {"
[COLOR="Red"]#[/COLOR] in_submenu=:
[COLOR="Red"]#[/COLOR] fi
done
if $in_submenu; then
echo "}"
fi