Ok, Here is the deal... I have been trying, and trying... and begging for Beryl to work... I have used three different guides... and an auto install script I found on the beryl project forums... NONE of them seem to be helping me.
I am running the fglrx drivers with an ATI Radeon 9200 SE
The errors I am getting when starting Beryl in a XGL session is this
**************************************************************
**************************************************************
- Beryl system compatiblity check *
Detected xserver : XGL
Checking Display localhost:1.0 ...
Checking for XComposite extension : passed (v0.3) Checking for XDamage extension : passed Checking for RandR extension : passed Checking for XSync extension : passed
beryl: GLX_EXT_texture_from_pixmap is missing beryl: Using non-tfp mode beryl: GLX_SGIX_fbconfig is missing beryl: Failed to manage screen: 0 beryl: No manageable screens found on display localhost:1.0
My xorg file is set up like this
/etc/X11/xorg.conf (xorg X Window System server configuration file)
#
This file was generated by dexconf, the Debian X Configuration tool, using
values from the debconf database.
#
Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
(Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
This file is automatically updated on xserver-xorg package upgrades *only*
if it has not been modified since the last upgrade of the xserver-xorg
package.
#
If you have edited this file but would like it to be automatically updated
again, run the following command:
sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout" Identifier "Default Layout" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "stylus" "SendCoreEvents" InputDevice "cursor" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" EndSection
Section "Files"
# path to defoma fonts FontPath "/usr/share/X11/fonts/misc" FontPath "/usr/share/X11/fonts/cyrillic" FontPath "/usr/share/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/X11/fonts/Type1" FontPath "/usr/share/X11/fonts/100dpi" FontPath "/usr/share/X11/fonts/75dpi" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection
Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection
Section "ServerFlags" Option "AIGLX" "off" EndSection
Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "gb" Option "XkbOptions" "lv3:ralt_switch" EndSection
Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ExplorerPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "true" EndSection
Section "InputDevice"
# /dev/input/event # for USB Identifier "stylus" Driver "wacom" Option "Device" "/dev/wacom" # Change to Option "Type" "stylus" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection
Section "InputDevice"
# /dev/input/event # for USB Identifier "eraser" Driver "wacom" Option "Device" "/dev/wacom" # Change to Option "Type" "eraser" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection
Section "InputDevice"
# /dev/input/event # for USB Identifier "cursor" Driver "wacom" Option "Device" "/dev/wacom" # Change to Option "Type" "cursor" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection
Section "Monitor" Identifier "L50S" Option "DPMS" EndSection
Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection
Section "Device" Identifier "ATI Technologies, Inc. RV280 [Radeon 9200 SE]" Driver "fglrx" BusID "PCI:1:0:0" EndSection
Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" Option "VideoOverlay" "on" Option "OpenGLOverlay" "off" EndSection
Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. RV280 [Radeon 9200 SE]" Monitor "L50S" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection EndSection
Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection
Section "DRI" Mode 0666 EndSection
Section "Extensions" Option "Composite" "False" EndSection
and this is apparently my beryl set up....
ii beryl 0.1.9999.2~0beryl1 Compositing window manager, decorator and th
ii beryl-core 0.1.9999.2~0beryl1 Compositing window manager - Beryl Project ii beryl-manager 0.1.9999.2~0beryl1 Tray application launcher tool - Beryl Proje ii beryl-plugins 0.1.9999.2~0beryl1 Collection of plugins for Beryl ii beryl-plugins-data 0.1.9999.2~0beryl1 Plugins data - Beryl Project ii beryl-settings 0.1.9999.2~0beryl1 Plugin and configuration tool - Beryl Projec ii beryl-settings-bindings 0.1.9999.2~0beryl1 Plugin and configuration tool - Beryl Projec ii emerald 0.1.9999.2~0beryl1 Decorator for beryl ii libberyldecoration0 0.1.9999.2~0beryl1 Settings library for plugins - Beryl Project ii libberylsettings0 0.1.9999.2~0beryl1 Settings library for plugins - Beryl Project ii libemeraldengine0 0.1.9999.2~0beryl1 Decoration engines for beryl
Is anyone able to help? I am running Ubuntu 6.10 Edgy