_UPDATE:_ Here is some more information for anyone who might be able to help! [B] This is the output from an "lsusb" command:[/B]
Bus 001 Device 001: ID 0000:0000 Bus 002 Device 003: ID 0e0f:0002 Bus 002 Device 002: ID 0403:fbfc Future Technology Devices International, Ltd Bus 002 Device 001: ID 0000:0000
The device also operates on the "ftdi_sio.tar.gz" driver.
The output from a "dmesg":
[ 0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) [ 0.000000] BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data) [ 0.000000] BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 512MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f6c90 [ 0.000000] Entering add_active_range(0, 0, 131072) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131072 [ 0.000000] HighMem 131072 -> 131072 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 131072 [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125984 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F6C20 checksum 0 [ 0.000000] ACPI: RSDP 000F6C20, 0014 (r0 PTLTD ) [ 0.000000] ACPI: RSDT 1FEFAB5A, 0030 (r1 PTLTD RSDT 6040000 LTP 0) [ 0.000000] ACPI: FACP 1FEFEF06, 0074 (r1 INTEL 440BX 6040000 PTL F4240) [ 0.000000] ACPI: DSDT 1FEFAB8A, 437C (r1 PTLTD Custom 6040000 MSFT 100000D) [ 0.000000] ACPI: FACS 1FEFFFC0, 0040 [ 0.000000] ACPI: APIC 1FEFEF7A, 005E (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 1FEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 17 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 17 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] Built 1 zonelists. Total pages: 130048 [ 0.000000] Kernel command line: root=UUID=6348b9d1-fa1c-434a-b144-31344a363db4 ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1995.111 MHz processor. [ 9.844262] Console: colour VGA+ 80x25 [ 9.845120] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 9.845861] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 9.846719] Memory: 508300k/524288k available (2015k kernel code, 15444k reserved, 915k data, 364k init, 0k highmem) [ 9.846762] virtual kernel memory layout: [ 9.846766] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 9.846768] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 9.846772] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 9.846774] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 9.846775] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 9.846777] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB) [ 9.846778] .text : 0xc0100000 - 0xc02f7e86 (2015 kB) [ 9.846857] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 9.847714] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 9.928297] Calibrating delay using timer specific routine.. 3997.28 BogoMIPS (lpj=7994569) [ 9.928359] Security Framework v1.0.0 initialized [ 9.928421] SELinux: Disabled at boot. [ 9.928484] Mount-cache hash table entries: 512 [ 9.928546] CPU: After generic identify, caps: 0fe9fbff 00100000 00000000 00000000 00000001 00000000 00000000 [ 9.928609] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9.928640] CPU: L2 cache: 2048K [ 9.928702] CPU: After all inits, caps: 0fe9fbff 00100000 00000000 00003940 00000001 00000000 00000000 [ 9.928765] Compat vDSO mapped to ffffe000. [ 9.928827] Checking 'hlt' instruction... OK. [ 9.944274] SMP alternatives: switching to UP code [ 9.944336] Early unpacking initramfs... done [ 10.232120] ACPI: Core revision 20070126 [ 10.232182] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 10.232495] CPU0: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz stepping 08 [ 10.232716] SMP alternatives: switching to SMP code [ 10.236172] Booting processor 1/1 eip 3000 [ 10.247612] Initializing CPU#1 [ 10.324097] Calibrating delay using timer specific routine.. 3991.34 BogoMIPS (lpj=7982691) [ 10.324580] CPU: After generic identify, caps: 0fe9fbff 00100000 00000000 00000000 00000001 00000000 00000000 [ 10.324833] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.324863] CPU: L2 cache: 2048K [ 10.325069] CPU: After all inits, caps: 0fe9fbff 00100000 00000000 00003940 00000001 00000000 00000000 [ 10.325726] CPU1: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz stepping 08 [ 10.325789] Total of 2 processors activated (7988.63 BogoMIPS). [ 10.325851] ENABLING IO-APIC IRQs [ 10.326076] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.473539] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 10.495532] Brought up 2 CPUs [ 10.556059] migration_cost=1571 [ 10.558031] Booting paravirtualized kernel on bare hardware [ 10.558156] Time: 17:32:59 Date: 01/19/108 [ 10.558218] NET: Registered protocol family 16 [ 10.560510] EISA bus registered [ 10.560573] ACPI: bus type pci registered [ 10.560635] PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=2 [ 10.560674] PCI: Using configuration type 1 [ 10.560726] Setting up standard PCI resources [ 10.568060] ACPI: EC: Look up EC in DSDT [ 10.584051] ACPI: Interpreter enabled [ 10.584084] ACPI: (supports S0 S1 S4 S5) [ 10.584147] ACPI: Using IOAPIC for interrupt routing [ 10.601018] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 10.601081] PCI: Probing PCI hardware (bus 00) [ 10.604056] PCI quirk: region 1000-103f claimed by PIIX4 ACPI [ 10.604096] PCI quirk: region 1040-104f claimed by PIIX4 SMB [ 10.608096] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 10.610005] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15) [ 10.610068] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15) [ 10.610130] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15) [ 10.610193] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15) [ 10.614322] Linux Plug and Play Support v0.97 (c) Adam Belay [ 10.614368] pnp: PnP ACPI init [ 10.614430] ACPI: bus type pnp registered [ 10.640491] pnp: PnP ACPI: found 12 devices [ 10.640542] ACPI: ACPI bus type pnp unregistered [ 10.640605] PnPBIOS: Disabled by ACPI PNP [ 10.640783] PCI: Using ACPI for IRQ routing [ 10.640845] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 10.660014] NET: Registered protocol family 8 [ 10.660030] NET: Registered protocol family 20 [ 10.664032] Time: tsc clocksource has been installed. [ 10.691999] PCI: Bridge: 0000:00:01.0 [ 10.692017] IO window: disabled. [ 10.692080] MEM window: disabled. [ 10.692137] PREFETCH window: disabled. [ 10.692200] PCI: Bridge: 0000:00:11.0 [ 10.692240] IO window: 2000-2fff [ 10.692282] MEM window: e8900000-e89fffff [ 10.692316] PREFETCH window: 30000000-300fffff [ 10.692378] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 10.692441] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 16 [ 10.692503] NET: Registered protocol family 2 [ 10.731992] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) [ 10.732055] TCP established hash table entries: 65536 (order: 7, 786432 bytes) [ 10.732117] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 10.732180] TCP: Hash tables configured (established 65536 bind 65536) [ 10.732242] TCP reno registered [ 10.743999] checking if image is initramfs... it is [ 11.075848] Freeing initrd memory: 7034k freed [ 11.076193] Simple Boot Flag at 0x36 set to 0x1 [ 11.080131] audit: initializing netlink socket (disabled) [ 11.080193] audit(1203442376.696:1): initialized [ 11.086347] VFS: Disk quotas dquot_6.5.1 [ 11.086547] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 11.087973] io scheduler noop registered [ 11.088000] io scheduler anticipatory registered [ 11.088007] io scheduler deadline registered [ 11.088070] io scheduler cfq registered (default) [ 11.088374] Limiting direct PCI/PCI transfers. [ 11.088506] Boot video device is 0000:00:0f.0 [ 11.089983] isapnp: Scanning for PnP cards... [ 11.190102] Switched to high resolution mode on CPU 1 [ 11.195112] Switched to high resolution mode on CPU 0 [ 11.444282] isapnp: No Plug & Play device found [ 11.487886] Real Time Clock Driver v1.12ac [ 11.488117] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 11.491556] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 11.491755] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 11.492380] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 11.492747] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 11.494074] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 11.495655] input: Macintosh mouse button emulation as /class/input/input0 [ 11.495903] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12 [ 12.002813] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 12.002908] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 12.003742] mice: PS/2 mouse device common for all mice [ 12.004321] EISA: Probing bus 0 at eisa.0 [ 12.004379] Cannot allocate resource for EISA slot 1 [ 12.004416] Cannot allocate resource for EISA slot 2 [ 12.004473] EISA: Detected 0 cards. [ 12.004531] TCP cubic registered [ 12.004589] NET: Registered protocol family 1 [ 12.004647] Using IPI No-Shortcut mode [ 12.004881] Magic number: 12:682:542 [ 12.004939] Freeing unused kernel memory: 364k freed [ 12.005254] input: AT Translated Set 2 keyboard as /class/input/input1 [ 13.322599] AppArmor: AppArmor initialized<5>audit(1203442379.196:2): type=1505 info="AppArmor initialized" pid=1177 [ 13.347468] fuse init (API version 7.8) [ 13.363205] Failure registering capabilities with primary security module. [ 13.406669] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.406775] ACPI: Processor [CPU1] (supports 8 throttling states) [ 13.406861] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 13.406947] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 13.908089] SCSI subsystem initialized [ 13.910885] Fusion MPT base driver 3.04.04 [ 13.910902] Copyright (c) 1999-2007 LSI Logic Corporation [ 13.911469] Fusion MPT SPI Host driver 3.04.04 [ 13.911996] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 13.912123] mptbase: Initiating ioc0 bringup [ 13.926838] usbcore: registered new interface driver usbfs [ 13.926965] usbcore: registered new interface driver hub [ 13.979139] usbcore: registered new device driver usb [ 13.983025] libata version 2.21 loaded. [ 13.988211] USB Universal Host Controller Interface driver v3.0 [ 13.991207] Floppy drive(s): fd0 is 1.44M [ 13.995688] pcnet32.c:v1.33 27.Jun.2006 [email]tsbogend@alpha.franken.de[/email] [ 14.006808] FDC 0 is a post-1991 82077 [ 14.030178] ioc0: 53C1030: Capabilities={Initiator} [ 14.158353] scsi0 : ioc0: LSI53C1030, FwRev=01032920h, Ports=1, MaxQ=128, IRQ=17 [ 14.274056] scsi 0:0:0:0: Direct-Access VMware, VMware Virtual S 1.0 PQ: 0 ANSI: 2 [ 14.274125] target0:0:0: Beginning Domain Validation [ 14.274195] target0:0:0: Domain Validation skipping write tests [ 14.274218] target0:0:0: Ending Domain Validation [ 14.274288] target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127) [ 14.280994] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 14.281063] ehci_hcd 0000:02:02.0: EHCI Host Controller [ 14.281132] ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 19 [ 14.281202] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 14.281271] ehci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 1 [ 14.281341] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2 [ 14.281479] PCI: cache line size of 32 is not supported by device 0000:02:02.0 [ 14.281509] uhci_hcd 0000:00:07.2: irq 19, io base 0x00001060 [ 14.282031] ehci_hcd 0000:02:02.0: irq 18, io mem 0xe8900000 [ 14.282100] ehci_hcd 0000:02:02.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.282838] usb usb2: configuration #1 chosen from 1 choice [ 14.283153] hub 2-0:1.0: USB hub found [ 14.283282] hub 2-0:1.0: 2 ports detected [ 14.291173] sd 0:0:0:0: [sda] 20971520 512-byte hardware sectors (10737 MB) [ 14.291406] sd 0:0:0:0: [sda] Write Protect is off [ 14.291438] sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00 [ 14.291543] sd 0:0:0:0: [sda] Cache data unavailable [ 14.291571] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 14.292105] sd 0:0:0:0: [sda] 20971520 512-byte hardware sectors (10737 MB) [ 14.292254] sd 0:0:0:0: [sda] Write Protect is off [ 14.292259] sd 0:0:0:0: [sda] Mode Sense: 5d 00 00 00 [ 14.292328] sd 0:0:0:0: [sda] Cache data unavailable [ 14.292332] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 14.292402] sda: sda1 sda2 < sda5 > [ 14.335120] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.338411] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.390096] usb usb1: configuration #1 chosen from 1 choice [ 14.390330] hub 1-0:1.0: USB hub found [ 14.390514] hub 1-0:1.0: 6 ports detected [ 14.456576] Attempting manual resume [ 14.456614] swsusp: Resume From Partition 8:5 [ 14.456632] PM: Checking swsusp image. [ 14.456771] PM: Resume from disk failed. [ 14.486310] kjournald starting. Commit interval 5 seconds [ 14.486385] EXT3-fs: mounted filesystem with ordered data mode. [ 14.494849] ata_piix 0000:00:07.1: version 2.11 [ 14.495053] scsi1 : ata_piix [ 14.495171] scsi2 : ata_piix [ 14.495240] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011050 irq 14 [ 14.495258] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011058 irq 15 [ 14.495474] ata1: port disabled. ignoring. [ 14.806591] ata2.00: ATAPI: VMware Virtual IDE CDROM Drive, 00000001, max UDMA/33 [ 14.962067] ata2.00: configured for UDMA/33 [ 14.966678] scsi 2:0:0:0: CD-ROM BT5342M ZZF932V 1.01 PQ: 0 ANSI: 5 [ 14.966750] scsi 2:0:0:0: Attached scsi generic sg1 type 5 [ 14.966965] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 16 [ 14.967109] pcnet32: PCnet/PCI II 79C970A at 0x2000, 00 0c 29 8f f0 9b assigned IRQ 16. [ 14.969648] eth0: registered as PCnet/PCI II 79C970A [ 14.969720] pcnet32: 1 cards_found. [ 32.818947] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 32.843132] shpchp: Unknown symbol acpi_run_oshp [ 32.843204] shpchp: Unknown symbol pci_hp_change_slot_info [ 32.843277] shpchp: Unknown symbol pci_hp_register [ 32.843454] shpchp: Unknown symbol pci_hp_deregister [ 32.843617] shpchp: Unknown symbol acpi_get_hp_params_from_firmware [ 32.867092] input: PC Speaker as /class/input/input2 [ 32.980337] Linux agpgart interface v0.102 (c) Dave Jones [ 33.025274] agpgart: Detected an Intel 440BX Chipset. [ 33.029535] agpgart: AGP aperture is 256M @ 0x0 [ 33.399516] input: ImPS/2 Generic Wheel Mouse as /class/input/input3 [ 33.430017] parport_pc 00:08: reported by Plug and Play ACPI [ 33.431268] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 33.484235] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device [ 33.484510] piix4_smbus 0000:00:07.3: Host SMBus controller not enabled! [ 33.490452] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.058288] sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray [ 34.058452] Uniform CD-ROM driver Revision: 3.20 [ 34.058982] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 36.502962] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 38.644233] lp0: using parport0 (interrupt-driven). [ 38.760010] Adding 489940k swap on /dev/sda5. Priority:-1 extents:1 across:489940k [ 39.272766] EXT3 FS on sda1, internal journal [ 41.300339] No dock devices found. [ 41.437164] input: Power Button (FF) as /class/input/input4 [ 41.437643] ACPI: Power Button (FF) [PWRF] [ 41.471408] ACPI: AC Adapter [ACAD] (on-line) [ 43.831147] ppdev: user-space parallel port driver [ 43.931765] eth0: link up [ 44.794022] audit(1203442411.294:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4520 profile="/usr/sbin/cupsd" [ 47.149944] vmmemctl: module license 'unspecified' taints kernel. [ 47.208574] VMware memory control driver initialized [ 47.209869] vmmemctl: started kernel thread pid=4730 [ 47.966881] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 47.966950] apm: disabled - APM is not SMP safe. [ 48.765004] Failure registering capabilities with primary security module. [ 49.522223] Bluetooth: Core ver 2.11 [ 49.522830] NET: Registered protocol family 31 [ 49.522855] Bluetooth: HCI device and connection manager initialized [ 49.522988] Bluetooth: HCI socket layer initialized [ 49.546161] Bluetooth: L2CAP ver 2.8 [ 49.546179] Bluetooth: L2CAP socket layer initialized [ 49.654756] Bluetooth: RFCOMM socket layer initialized [ 49.655151] Bluetooth: RFCOMM TTY layer initialized [ 49.655171] Bluetooth: RFCOMM ver 1.8 [ 54.286584] NET: Registered protocol family 17 [ 61.550545] NET: Registered protocol family 10 [ 61.558224] lo: Disabled Privacy Extensions [ 72.178178] eth0: no IPv6 routers present [ 288.012338] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 288.289663] usb 2-1: configuration #1 chosen from 1 choice [ 288.546308] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 288.692711] usb 2-2: configuration #1 chosen from 1 choice [ 288.698426] hub 2-2:1.0: USB hub found [ 288.701939] hub 2-2:1.0: 7 ports detected
Thanks in advance to anyone who can help me out!